In the wake of globalization, quick and easy introduction of new products on the world market is becoming increasingly important. Product liability laws in the US are much more stringent than in Europe. If products are to be exported to North America, they should be UL-certified, especially if they are electromechanical products.
Compliance with the US safety regulations is evidenced by a certification mark of a certified test laboratory (Underwriters Laboratory). For the certification of his products, the manufacturer has to prove that they comply with the specified safety requirements. The field attachable connector versions of the M8x1 and M12x1 series are now UL-approved in accordance with UL 2238. In addition to the standard products with A coding (M8x1 and M12x1), the B and D coded variants (M12x1), axial or angled with the corresponding rated voltage and current rating values, are also certified.
|
UL approval circular connectors - CONEC
- June 29, 2017
- 1 min read
Related Blog Posts
- January 06, 2021
- 1 min read
CONEC has introduced patch cords in its product range that are manufactured with an Industrial Ethernet cord with a stranded wire cross-section of AWG22. Low losses are realized it allows for long transmission distances.
In industrial environments, the ProfiNet cord with PUR insulation can be used. With all RJ45 connectors, the cable shield is connected through the internal strain relied to the...
- November 19, 2020
- 1 min read
CONEC is extending their range of DT and Superseal valve connectors with a double cable outlet version.
These would mostly be used by those who require Y-distributors for distribution of signals and power. This allows the possibilities for making systems more compact and reduces installation space, for example in a DaisyChain application with multiple cascaded connectors.
The double outlet...
- September 30, 2020
- 1 min read