Replacement for Standard IP20 systems to IP67 protected system CONEC SlimCon
May 27, 2016
1 min read
CONEC SlimCon IP67 D-SUB High Density and Combination connectors are supplements to the IP67 D-SUB connector family. The CONEC SlimCon series has a very compact design of IP67 sealed D-SUB connectors with a one-piece zinc die-cast shell.
The panel cut-out for the CONEC SlimCon series corresponds to the standard of other D-SUB connectors and thus no new cut-outs are required and refitting from standard IP20 systems to the new IP67 system of the CONEC SlimCon series is possible. The one-piece zinc die-cast shell makes the new CONEC SlimCon D-SUB connector a mechanically extremely robust interface with reliable IP67 protection.
Small installation space
Solid one-piece zinc die-cast shell
Simply replacement from standard IP20 systems to the IP67 protected system CONEC SlimCon
Appropriate for subsequent overmoulding (solder cup)
CONEC has introduced patch cords in its product range that are manufactured with an Industrial Ethernet cord with a stranded wire cross-section of AWG22. Low losses are realized it allows for long transmission distances.
In industrial environments, the ProfiNet cord with PUR insulation can be used. With all RJ45 connectors, the cable shield is connected through the internal strain relied to the...
CONEC is extending their range of DT and Superseal valve connectors with a double cable outlet version.
These would mostly be used by those who require Y-distributors for distribution of signals and power. This allows the possibilities for making systems more compact and reduces installation space, for example in a DaisyChain application with multiple cascaded connectors.